Cub Cadet Series 390 Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cub Cadet Series 390. Cub Cadet Series 390 20 pagina's. Cub cadet front tine tiller operator's manual
Pagina afdrukken
5
Maintaining
Your Tiller
WARNING
Disconnect the spark
plug wire and ground
it against the engine
before performing
any repairs or
maintenance.
Reverse Tine
Engagement Cable
Engagement Cable
Figure 5–7: Reverse drive belt removal.
Figure 5–8: Reverse drive belt removal.
Cable Collar
Figure 5–9: Reverse drive belt removal.
From time to time you may need to adjust the tension on
the forward and reverse tine engagement cables.
1. Disconnect and ground the spark plug wire against
2. Adjust either the forward or reverse clutch cable by
3. Turn the cable collar section one or two turns to add or
4. Retighten the lock nut against the cable collar.
Forward Tine
5. With the forward and reverse tine engagement
Lock Nut
Figure 5–10: Reverse drive belt removal.
14
Cable Adjustment
the engine.
loosening the hex nut. See Figure 5–8.
lesson tension on the cable. See Figure 5–9.
See Figure 5–10.
handles in neutral (released) positions, pull the starter
rope several times. The tines should not turn. If they
turn forward, adjust the forward tine engagement
cable to release tension using the previous steps in
this section. If the tines turn toward rear, adjust the
reverse tine engagement cable to lesson the tension
as with previous steps. Check again for correct
tension on cables.
Lock Nut