Blagdon Force hybrid 10000 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Blagdon Force hybrid 10000. Blagdon Force hybrid 10000 6 pagina's. Pond pump for filters and waterfalls

Pagina afdrukken

MAINTENANCE & CLEANING

Warning - Failure to carry out routine maintenance leaving the pump

under reduced or no flow conditions for long periods (i.e. blocked

outlet, pipework filter cage) will result in a shorter pump life and will

invalidate the guarantee.

Blagdon Force-Hybrid Pumps are centrifugal pumps with a magnetic impeller

movement driven by a watertight asynchronous motor. They require minimum

cleaning, only periodic cleaning of the pre-filter cage and impeller is necessary.

Monthly Maintenance/Opening the cage

Remove cage and impeller cover, wash all parts thoroughly with fresh water.

Turn impeller cover

anti-clockwise to open

Turn both locks to

unlock position

Depress button

Pull

firmly

apart

Remove valve

locater

MAINTENANCE & CLEANING

Annual Maintenance/Removing the impeller

First follow the Monthly Maintenance/Opening the cage steps.

Remove the impeller and wash all parts thoroughly with fresh water.

Remove the impeller and wash

all parts in clean water

Pull out the motor from the back page

Remove the two pump

locating screws

Dismantle pump and examine all parts for wear or damage, replacing any parts that

show obvious wear and/or damage. (See getting to know your pump for parts/

description and replacement parts codes.) Particular care should be taken to examine

the cable entry point and the cable; if there is any sign of damage the pump should be

discarded.

Winter Storage

The pump can be run in the pond during the winter but care should be taken to

ensure that it is fully immersed and cannot freeze solid. If the pump is not used

during the winter, follow annual maintenance procedure and store frost-free in the

house or garage until spring.

Remove the four impeller

chamber screws