3d XPRO 490 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3d XPRO 490. 3d XPRO 490 17 pagina's.

- Make sure sure the bilge / deck is dry, drain the water othewise.

- Make sure the tube is correctly inflated.

- Make sure you have the correct weight distribution. Sea conditions may require passengers to

move forward to the boat to get the boat on plane before they return to their initial positions.

The outboard engine plays a big role in the performance of the boat. Please make sure you use

a suitable outboard engine for the boat.

Outboard trim angle can be ajusted to improve planing and general performance. Adjust the po-

sition of the trim rod of your motor to define the trim angle of the outboard motor in relation to

the transom. Make test runs with the trim set to different angles to find the position that works

best for your boat and operating conditions.

Bow down, too much trim-in

Bow up, too much trim-out

Right position