3D AEROWORKS Pilatus PC-21 Montagehandleiding en gebruikershandleiding - Pagina 10
Blader online of download pdf Montagehandleiding en gebruikershandleiding voor {categorie_naam} 3D AEROWORKS Pilatus PC-21. 3D AEROWORKS Pilatus PC-21 19 pagina's.
Pagina afdrukken
10
Bend a section of 1mm steel wire to connect the elevators together.
Test fit the wire and the elevators connection to the horizontal stabilisers before gluing the
wire to the elevators, or the elevators to the tail plane. There should be un-obstructed travel.
11
Glue the rudder, elevators and ailerons in place. Make sure each control surface has full and
free movement.
12
Glue the wingtips and tail cone in place (if required).