3D AEROWORKS TRACER 2000 Montagehandleiding en gebruikershandleiding - Pagina 7
Blader online of download pdf Montagehandleiding en gebruikershandleiding voor {categorie_naam} 3D AEROWORKS TRACER 2000. 3D AEROWORKS TRACER 2000 19 pagina's. Thermal glider
Pagina afdrukken3
Using a soldering iron, melt small holes in fuse 6 where the nylon wing bolts will pass
through.
The holes should be just big enough for the m6 nylon bolt to fit through.
4
Assembling the V-tail
-
Slide the center pieces of the v-tail over the 8mm carbon tube.
(marked in red)