Discover Video Mantis Encoder Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Discover Video Mantis Encoder. Discover Video Mantis Encoder 16 pagina's.

Find IP Address

Apply power and turn the front panel switch to the on position. Allow a

few minutes for the unit to boot up.

The Mantis is configured for DHCP and will obtain an IP address

automatically. To find the IP address used, insert a USB Flash Drive

into the USB connector and wait a few moments. Mantis will write a

file "IP.txt" which you may then open on a computer to read the IP

address. The USB must be formatted FAT16 or else the file may not

write properly.

You may also use the finder application to discover the IP address over

the network, or you may search your router's DHCP table to find the IP

address used.

Enter the IP address in a browser. When prompted, enter default

username and password:

Username:

admin

Password:

000000

Set up the live streaming using the settings page:

Page 5

Mantis Encoder