3D Cultures 3D Bio-Printer Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D Cultures 3D Bio-Printer. 3D Cultures 3D Bio-Printer 16 pagina's.

Since there are no set standards in bioprinting, the selection of the features/settings below is up to

the user. Take notes of what works for your printing needs. Note that it will require a few trials to get

it right. It is recommended to test your printing before printing the actual experimental sample.

13. Click Advanced Tab, then change the settings to match those in the accompanying image.

14. Finally, using the included Micro USB cable, plug one end into the usb port on the printer, then plug

the other end into an available USB port on the your computer. Watch the right hand corner of the

screen. A bubble will appear in the lower right corner of your computer which is telling you that

windows is installing the necessary printer drivers. Click the bubble and verify the the drivers have

been properly installed.

Congratualtions, you have installed Cura and connected your PC to your new 3D Bioprinter! Refer to Cura's documentation for

operating details and information on the various options available to you.

9 |

P a g e