Cube Mountain Bike Montagehandleiding - Pagina 5

Blader online of download pdf Montagehandleiding voor {categorie_naam} Cube Mountain Bike. Cube Mountain Bike 16 pagina's.

Assembly Manual

Fig. 3 Fit the quick release lever

on the left hand side

(when sitting on the bike)

Important: The conical ends of the two springs (C) and

(D) should always point towards the hub axle!

Important: Make sure that the quick release lever is always

on the left hand side of the front wheel (when sitting on the

bike)

III. Fitting the front wheel

Once the front wheel is ready to be fitted into the fork,

proceed as follows (depending on the type of brakes):

Fig. 4 Quick release skewer

when fitted

Important: Get a second person to help you when fitting the

front wheel or alternatively usea bike stand.

Remove the plastic protection from the fork dropouts (Fig. 5)

Fig. 5 Remove protection from the fork

a.) Wheels with hydraulic disc brakes

Lift the mountain bike by its stem with one hand

Remove the shipping protection from the hydraulic

disc brakes, by pulling the plastic out of the disc brake calliper

(Fig. 6 and 7)

Mountain Bike