Aereco S-RH Handleiding voor installatie en gebruik - Pagina 5

Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} Aereco S-RH. Aereco S-RH 8 pagina's. Humidity and temperature ambient air sensor

Pagina afdrukken

STEPS

1. Remove the front cover (A).

2. Unclip the electronic card (B) and the plastic protection (D) from the base (C).

3. Fix the base (C) by the mean of 2 screws (not supplied). The screws and

plug must be chosen according to the type of the support.

4. Connections : use PVC wires S minimum = 0.25 mm² for all the wires.

On the electronic card (B), connect the wires as follows:

∙ PWM output RH : 0 % = 0 % RH ; 100 % = 100 % RH

∙ PWM output T : 0 % = 0°C ; 100 % = + 50°C

∙ 0 - 10 V output RH : 0 V = 0 % RH ; 10 V = 100 % RH

∙ 0 - 10 V output T : 0 V = -40°C; 10 V = + 125°C

PWM and 0-10 V output can be use simultaneously.

5. Clip the electronic card (B) with the plastic protection (D) inside the base (C)

6. Put the cover (A) on the base (C)

7. Connect the wires to the external devices (12 VDC supply and device

driven by the PWM or 0-10 V output with a mini 1MΩ impedence

8. Only once all the connections have been made, plug on the supply of the

system.

V+

12 VDC

PWM RH

n.1

PWM

Temp. n.1

10 V –

GND

0 V

PWM Temp.

n.2

PWM RH

10 V –

0 V

Temp.