ABBINA EMG 600 IX Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} ABBINA EMG 600 IX. ABBINA EMG 600 IX 20 pagina's. Electrogas

Pagina afdrukken

Instructions for the installer

Installation

This appliance is not provided with a combu-stion

product discharge. It is recommended that it be

installed in sufficiently aerated places, in terms of the

laws in force. The quantity of air which is necessary for

combu-stion must not be below 2.0 m3/h for each kW of

installed power. See table of burner power.

Positioning (Fig. 2)

The appliance can be fitted into a working area

as illustrated on the corresponding figure. Before

positioning the hob, fit the seal X around the entire

periphery of the hole cut in the worktop.

Gas connection (Fig. 4)

Connect the appliance to the gas cylinder or to the

installation according to the prescribed standards

in force, and ensure beforehand, that the appliance

matches the type of gas available. Otherwise, see

"Adaptation to various types of gas". Furthermore,

check that the feed pressure falls within the values

described on the table: "User chacteristics".

Rigid/semi rigid metal connection Carry out the

connection with fittings and metal pipes (even flexible

pipes) so as to obtain counter stress the inner parts of

the appliance.

N.B. - when the installation has been carried out, check

the perfect sealing of the entire connection system, by

using a soapy solution.

Fig. 4

Electrical connection (Fig. 5)

Prior to carrying out the electrical connection, please

ensure that:

• the plant characteristics are such as to follow what is

indicated on the matrix plate placed at the bottom of

the working area;

• that the plant is fitted with an efficient earth connection,

following the standards and law provisions in force. The

earth connection is compulsory in terms of the law.

Should there be no cable and/or plug on the equipment,

use suitable absorption material for the working

temperature as well, as indicated on the matrix plate.

Under no circumstance must the cable reach a

temperature above 50°C of the ambient tempera-ture.

If connecting directly to the mains power supply, fit

a multi-pole switch of a suitable size for the rated

capacity with a clearance distance which completely

disconnects the power line under overvoltage category

III conditions, consistently with the rules of installation

(the yellow/green earth wir must not be interrupted). The

plug or omnipolar switch must be easily reached on the

installed equipment.

ISO 7/1

ISO 228/1 (FR)

Fig. 5