Cube ACID 11583 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} Cube ACID 11583. Cube ACID 11583 9 pagina's. Grips

Pagina afdrukken

GENERAL INFORMATION

READ AND KEEP THESE INSTRUCTIONS IN A

SAFE PLACE

These and other enclosed instructions contain

important information on the installation,

commissioning and care of the product.

Carefully read all enclosed instructions, especially the

general safety instructions, before mounting or using

the product. Failure to follow the information in the

enclosed instructions may result in serious injury or

damage to the product itself and your vehicle. Keep the

enclosed instructions on hand for further use. If you

pass on the product or the vehicle equipped with it to a

third party, always include all associated instructions.

We at CUBE strongly recommend that you have this

product assembled by your specialist dealer.

The enclosed instructions are subject to European

legislation. If the product or vehicle is delivered outside

Europe, supplementary instructions may have to be

included by the manufacturer/importer.

EXPLANATION OF SYMBOLS

The following symbols and signal words are used in

the enclosed instructions, on the product or on the

packaging.

WARNING!

Hazard with a medium degree of risk, which may result

in death or serious injury if not avoided.

CAUTION!

Hazard with moderate degree of risk, which may result

in moderate or minor injuries if not avoided.

NOTE!

Warning of possible damage to property.

Useful additional information on assembly or

operation.

Read and follow the enclosed instructions.

Check the manufacturer's specifications and

instructions for correct installation.

Check the facts as presented.

The article number listed under the symbol is

only suitable for handlebars of the specified

XX mm

diameter.

FOR FURTHER INFORMATION

Please visit us occasionally on our website

at www.CUBE.eu. There you will find news,

information and the latest versions of our

operating instructions, as well as the addresses of our

specialist dealers.

Pending System GmbH & Co. KG

Ludwig-Hüttner-Str. 5-7

95679 Waldershof

Germany

+49 (0)9231 97 007 80

www.cube.eu

The article is only suitable for bicycles with a

m i n

maximum seat height above 635 mm. (measured

from the ground to the seating surface)

The article is only suitable for bicycles with a

m a x

maximum seat height above 435 mm. (measured

from the ground to the seating surface)

Degrease the surface with alcohol and a lint-

free cloth.

a lc .

The article is not suitable for use on toy

scooters.

SAFETY INFORMATION FOR

ACCESSORY PARTS

WARNING!

Risk of accidents and injury!

Read all safety information and instructions. Failure to

comply with the safety information and instructions can

cause accidents, serious injuries and damage.

Safety of children

If children play with the packaging or small parts, they

can choke on them and suffocate or injure themselves.

» Keep small parts away from children.

» Do not let children play with the packaging or the

product.

» Do not leave the product and the vehicle unattended

during assembly.

Safety information for installation

» Before installation, check the delivery scope of the

product for completeness.

» Before installation, check all the components of the

product and the vehicle for damage, sharp edges

or burrs.

» If the delivery scope of the product is incomplete or

if you discover any damage, sharp edges or burrs on

the components or the vehicle, do not use it.

» Have the product and the vehicle checked by your

specialist dealer.

» Make sure that all controls (brake levers, gear le-

vers/ twist-grip shifters, etc.) can be reached without

restriction and operated safely after mounting the

product. If necessary, adjust the controls accordingly.

» Only use the intended parts and accessories for the

product. Components from other manufacturers

may impede its proper functioning.

» If you would like to combine this product with a

vehicle from another manufacturer, please check the

vehicle specifications and dimensional accuracy and

compatibility in accordance with the specifications

in the accompanying manual and instructions for

your vehicle.

» Screw connections must be properly tightened to

the correct tightening torque values using a torque

wrench.

» Check the product for a firm seat.

» If you are inexperienced in using a torque wrench or

do not own a suitable torque wrench, have the screw

connections checked by your specialist dealer.

» Observe the specific torque values for aluminium or

carbon fibre reinforced plastic (CFRP) components.

Also read and observe the relevant information in the

instruction manual for your vehicle.

Safety information for operation

Note that accessories can greatly influence the charac-

teristics of the vehicle.

» If you are not absolutely sure or if you have any ques-

tions, contact your dealer.

» The enclosed instructions cannot cover every

possible combination of the product with all vehicle

models.

Safety information for maintenance

Prevent malfunctions due to excessive wear, material

fatigue or loose screw connections:

» Check the product and your vehicle regularly.

» Do not use the product or your vehicle as a whole

if you notice excessive wear or loose screw con-

nections.

» Do not use the vehicle if you notice cracks, deforma-

tions or changes in colour.

» Have the vehicle checked immediately by your

specialist dealer if you notice excessive wear, loose

screw connections, deformations, cracks or changes

in colour.

» After a fall, all components must be checked for

damage and replaced if necessary.

CLEANING AND CARE

NOTE!

Risk of damage!

Improper handling of cleaning agents can cause

damage to the product.

Do not use aggressive cleaning agents, brushes

with metal or nylon bristles or sharp or metallic

cleaning objects such as knives, hard spatulas and/

or the like as they can damage the surfaces and

the product.

Clean the product regularly with water (add a mild

detergent if necessary) and a soft cleaning cloth.

STORAGE

All parts must be completely dry before storage.

• Always store the product in a dry place.

• Protect the product from direct sunlight.

DISPOSAL

Dispose of the packaging according to type. Put card-

board and carton in the waste paper collection, foil and

plastic parts in the recyclables collection.

Dispose of the product in accordance with

the laws and regulations in force in your

country.

LIABILITY FOR MATERIAL DEFECTS

If any defects should occur, contact your specialist

dealer from whom you purchased the product.

To ensure that your claim is processed smoothly, you

will have to provide proof of purchase and inspection

certificates.

Therefore, keep them in a safe place.

To ensure a long service life and durability of your

product or vehicle, it must only be used in accordance

with its intended purpose. Be sure to observe the infor-

mation in the operating instructions for your vehicle.

In addition, the assembly instructions (especially

torques for screws) and the prescribed maintenance

intervals must be observed.