CUBE in-a-box V2.series Gedetailleerde montage-instructies - Pagina 5
Blader online of download pdf Gedetailleerde montage-instructies voor {categorie_naam} CUBE in-a-box V2.series. CUBE in-a-box V2.series 6 pagina's.
Pagina afdrukken
11
12
13
14
15
16
17
- 3 -
Place the raceway cover on
top of the plastic cavaliers
on each side of the panel.
To close the raceway cover,
push down on each side of
the cover until it clips in.
Slide/adjust shelf supports
into posts B at the height of
your choice. You need to
tighten the chromed-screw
to make it hold.
Display the shelf on top of
the shelf-supports.
Push vertically on each of
the black plastic brackets
until it fits in.
Push the shelf all the way
toward the panel.
Display the book-holders as
per the holes.
Use a leveler to adjust the
shelf-supports height.
Place the metal-caps on top
of each post. Tighten them
with the self tapping
metal-screws.
Place magnet plastic-caps
on top of each post.
Place the grommet-cap on
the work-top hole.