CUBETAPE PRO Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} CUBETAPE PRO. CUBETAPE PRO 2 pagina's.
Ook voor CUBETAPE PRO: Snelstarthandleiding (3 pagina's)
Pagina afdrukkenCubetape PRO Quickstart Guide
Battery Charging and Feedback
A battery indicator symbol appears at the
left bottom of the screen.
The symbol displays battery in the form of percentage.
To charge the battery, connect Cubetape PRO to
a PC or power adaptor via the USB cable.
The charge light is on during the charging process.
When charging is finished, the charge light will go off.
If the battery remaining drops below 10%,
the symbol turns red and alerts the operator.
Tape Cassette and Battery Replacement
To replace the tape cassette or battery, remove the rubber sleeve first.
Slide the rear cover of the device down by pushing the index triangle at the upper right corner
of the rear cover.
Remove and replace the battery by slightly press the trough at the middle edge of the battery upward.
Remove and replace the tape cassette by turning Cubetape PRO over, extracting the tape a few
centimeters and then lifting the tape away from the device slowly.
Battery
Battery Compartment
www.cubetape.com
Tape Cassette
Tape Compartment
2