3D innovations DeskCycle Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D innovations DeskCycle. 3D innovations DeskCycle 12 pagina's. Using the large display manual
Ook voor 3D innovations DeskCycle: Gebruikershandleiding (16 pagina's), Handmatig (3 pagina's)

3D innovations DeskCycle Gebruikershandleiding

Using Threadlocker on the Pedal Threads

We provide a small bottle of Blue threadlocker with every bike. Only use it if you need it.
Who Needs to Use the Threadlocker?
If you plan to pedal the bike backwards, you will need to use the threadlocker. Pedaling
the bike backwards can loosen the pedals over time. The threadlocker will prevent this.
If the pedals come loose when using the bike, you should immediately stop using the
bike and apply the threadlocker to the pedal threads. Using the bike with loose pedals
will eventually damage the crank arm threads. Crank arm thread damage is not
covered under the warranty.
How to Apply the Threadlocker
1. If the pedals are already installed on the bike, you will need to remove them in order to
apply the threadlocker.
2. Apply the threadlocker to the pedal threads.
3. Screw the pedals in and tighten with the tool that comes with the bike. Make sure the
pedals are tight. If you no longer have this tool you can use a 15mm open-end wrench.
4. You should wait 24 hours before you pedal the bike backwards.
Where Can I Get More Blue Threadlocker?
If the pedals come loose and you no longer have the provided bottle of threadlocker, you can
purchase Blue Loctite® at any hardware store or at an online store like Amazon.com. Make
sure it is Blue Loctite®. Red Loctite® will make it nearly impossible to remove the pedal.
If You Need to Remove the Pedals.
The Blue threadlocker keeps the pedals from coming undone. It also makes them harder to
remove in the event that you need to replace them. You will need to use a 15mm open-end
wrench to remove the pedals. If you have trouble removing the pedals, you can take the bike
to a local bike shop to do this for you.

Optional Accessories

Below are some of the accessories available for the DeskCycle.
Display Stand with Extension Cable – The Display Stand lets you to place the
display on the top of our desk.
Display with Large Text – This Display is like the display on the bike except that the
text is about twice the size. This is not recommended when using the DeskCycle at
your desk.
Visit the DeskCycle website

Free Online Calorie Calculator

Calorie Calculator – Provides accurate calculation of calories burned when using the bike.
The Calorie Calculator uses your height, weight, gender, and age for improved accuracy. It
also calculates the wattage of the bike from the knob setting and the pedal speed.
The Calorie Calculator is located at the following link.
http://www.desk-cycle.com/CalorieCalculator.html
Feel free to email us at
our software.
www.Desk-Cycle.com
for a complete list of accessories.
with any suggestions or comments about
7