Aroma AWK-105 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Aroma AWK-105. Aroma AWK-105 7 pagina's.

Pagina afdrukken

Boiling Water

1. Place the power base on a sturdy, level and dry

surface.

2. Open the kettle lid using the lid release button

and fill with water. Water must be filled between

the MIN and MAX levels.

3. Close the lid ensuring it locks into place.

4. Make sure the bottom of the kettle is completely

dry then place the kettle onto the power base.

5. Plug the power cord into an available 120V AC

wall outlet.

6. Press the power switch down to begin heating.

7. Once the water reaches a boil (212°F), the power

switch will flip up and the kettle will automatically

shut off.

8. Gripping by the cool-touch handle, lift the kettle

off the power base to serve. Do not touch the

power base as it will be hot.

9. When finished serving, pour out any remaining

water and unplug the power cord.

Mineral Deposits

Regular use of the kettle can leave behind mineral

deposits or cause white residue and scale build-up on

the interior of the kettle. This residue is normal and will

not negatively affect you or the unit but can impact

the quality of prepared meals/drinks over time if not

cleaned properly. Follow these steps to remove deposits

and residue:

1. Fill the kettle with 4 cups of water and 3

tablespoons of baking soda OR 1 cup of white

vinegar OR ½ cup of lemon juice.

2. Bring contents to a boil by following the

instructions in "Boiling Water" above.

3. Allow the mixture to soak in the kettle overnight.

4. Empty contents and rinse out the kettle

thoroughly with warm, soapy water.

5. Fill the kettle with 4 cups of water and bring to

a boil. Once boiled, empty the kettle and dry

thoroughly.

6. Repeat as needed.

Note:

Honey Mint Tea

· Never fill the kettle with

any liquid other than

4 tbsp.

water.

1-2

· Never open the lid while

water is boiling.

4 cups

· If the kettle is heated

with no water,

Bring 4 cups of water to a boil. While the water boils, add 1 tablespoon

the internal safety

of honey each to 4 heat-safe mugs. Muddle together the mint and

mechanism will

automatically turn the

lemon juice then evenly distribute between the mugs. Pour the boiled

kettle off. However, the

water over the top of the ingredient mix in each mug then serve.

power switch will not

SERVES 4.

automatically return

to the OFF position.

Remove the kettle from

the power base and

fill with at least 2 cups

of water then return to

Hot Peanut Butter Cup

the power base. The

kettle will begin working

4 packets*

again once the internal

8 tsp.

temperature has

3 cups

dropped to a safe level.

*1 hot cocoa mix packet is approximately 1½ tablespoons

Bring 3 cups of water to a boil then allow the water to cool slightly.

Note:

Add hot cocoa mix packet* of your choice and ¾ cups of hot water

each to 4 heat-safe mugs. Thoroughly mix in 2 teaspoons of peanut

· Using distilled water

butter to each mug then serve.

will help to prevent

the buildup of mineral

SERVES 4.

deposits.

· It is recommended to

deep clean the kettle at

least once a month.

Recipes

honey

fresh mint leaves

lemon wedge

hot water

hot cocoa mix

peanut butter

hot water

For additional recipes, visit us at