Aroma AWK-208BR Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Aroma AWK-208BR. Aroma AWK-208BR 6 pagina's. Electric water kettle
Ook voor Aroma AWK-208BR: Gebruiksaanwijzing (6 pagina's)
USING YOUR WATER KETTLE
BEFORE FIRST USE:
Before using for the first time, it is recommended to clean the interior of
the kettle thoroughly. Please follow the procedure below before using
the kettle:
1. Remove all packing materials and make sure that the product is
received in good condition.
2. Taking care to keep the electrical components on the exterior of the
kettle dry, wipe out the interior of the kettle with a damp, soapy cloth.
HELPFUL HINT:
• If your hand will not fit inside the kettle, swish warm, soapy water
around the inside of the kettle with the lid closed. Rinse thoroughly
with water.
3. Rinse out the inside of the kettle thoroughly with water.
4. With a damp cloth, gently wipe off the exterior of the kettle. Do not
wipe off electrical components.
5. Dry all parts completely.
6. It is also recommended to run your kettle through one boiling cycle
before using it to consume beverages. Following the instructions in
"Boiling Water" below, boil one kettle of water. When water has
boiled, pour it out and rinse the inside of the kettle once more.
7. Your kettle is now ready for use.
BOILING WATER:
1. Place the power base on a sturdy, level and heat-resistant surface.
2. Remove the lid and fill with water through lid opening. Do not fill past
the "MAX" line on the interior of the kettle.
HELPFUL HINT:
• Use distilled water when possible for best taste and to minimize
mineral build-up in the kettle.
NOTE:
• Never fill kettle with any liquid other than water.
3. Replace the lid so that it snaps securely into place.
4. Place the kettle onto the power base and plug the power cord into an
available electrical outlet.
5. Push down on the POWER SWITCH to begin the boiling process. The
indicator light will illuminate.
All manuals and user guides at all-guides.com
CONTINUED ON NEXT PAGE
4
USING YOUR WATER KETTLE
BOILING WATER (CONT.):
NOTE:
• Never open the lid while water is boiling.
• The stainless steel body will become extremely hot.
7. Once the water has boiled, the POWER SWITCH will flip up with an
audible click. The indicator light will turn off, and the kettle will
automatically shut off.
8. Lift the kettle off the power base before pouring, using the easy-grip
handle. Take care not to touch the stainless steel body, as it will be hot.
9. After pouring, make sure the bottom of the kettle and the power base
are dry before placing kettle on the power base.
10.When not in use, unplug the power base from the electrical outlet.
HOW TO CLEAN
1. Always unplug the electric kettle and allow it to cool completely
before cleaning.
2. Wipe the exterior of the kettle with a clean, damp cloth, taking care
to avoid electrical components. Use a soft cloth to dry.
3. To clean the interior of the kettle, use a soft sponge and soapy water
to gently scrub.
HELPFUL HINT:
• If your hand will not fit inside the kettle, swish warm, soapy water
around the inside of the kettle with the lid closed. Rinse thoroughly
with water.
CAUTION:
• Never attempt to disassemble the kettle or power base.
• Never immerse the kettle, cord, plug or power base in water.
Always take care not to allow electrical components to come into
contact with water.
• Do not use abrasive cleaners or scouring pads of any kind on the
kettle or power base. This will cause damage to the finish and may
create a risk of electric shock.
5