Acoustas Melody-G Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Acoustas Melody-G. Acoustas Melody-G 6 pagina's. Wireless guitar microphone

Pagina afdrukken

Transmitter Installation

As a first step, remove all strings from the guitar. Next, make sure the battery, piezoelectric

film microphone, and optional peg connection are in place. The connectors should snap into the

transmitter very easily and cannot be reversed by accident due to their design. The battery, input,

and output connections are all labeled on the transmitter printed circuit board. Ensure the

transmitter turns on with its switch - a green light should glow very brightly.

The transmitter should be mounted right near the edge of the sound hole, on the top side when

the guitar is being held normally (closer to the player's head). Right-handed players can refer to

the images below; left-handed players should use the mirror image of this position.

The transmitter comes supplied with three hook-and-loop adhesive pads. Peel away the

protective plastic sheets from these adhesive pads. Clean and dry the receiving surface inside the

guitar, and with a single firm push, affix the transmitter. Next, place the battery and piezoelectric

film microphone in a similar manner, ensuring their wires are out of the way of the sound hole.

Finally, re-string the guitar. A good first test of Melody-G is to connect the receiver to a

computer's USB port in order to tune the guitar with the help of an online tuning application.

Turn the transmitter on and make sure the receiver's green indicator is consistently on and its

volume is turned all the way up.

Right-handed Martin installation

3300 W. Clay St., Richmond, VA, 23230

Right-handed Epiphone installation

http://www.acoustas.com/