CubuSynth Exhaust Bouwhandleiding - Pagina 3

Blader online of download pdf Bouwhandleiding voor {categorie_naam} CubuSynth Exhaust. CubuSynth Exhaust 12 pagina's. Expander module for the engine
Ook voor CubuSynth Exhaust: Gebruikershandleiding (5 pagina's)

Pagina afdrukken
CubuSynth Engine - Build Guide
STEP 1 (Main PCB)
Diodes
2
1N4148
Identify the 1N4148 diodes and put them in place. Orientation is Important! Make sure the line
on the diodes lines up with the stripe on the PCB silkscreen.
STEP 2 (Main PCB)
Resistors
1
1k
1
4k7
6
10k
2
20k
7
100k
1
470k
There is different ways to go, you might already have developed your own method to place the
components and solder.
You can always select the resistors of the same value, place them, turn the board around and
solder in place. Trim the solder legs and move on to the next value.
Another method is to place all resistors and solder them from the top, without turning around
the board.
On the next page, you can find a picture of all resistors in place.
Page 3
BUILD GUIDE
D8,D9
R135,R176,R221,R232
R138,R235
R137,R141,R143,R144,R153,R229,R230
R167,R231
R147,R154,R155,R177,R217,R218,R219,R220,
R222,R223,R224,R225,R226,R233
R136
PCB V1.1 Jul 2022