Dish Network WALLY Installatiehandleiding - Pagina 6
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dish Network WALLY. Dish Network WALLY 17 pagina's. Single-tuner hd satellite receiver
Ook voor Dish Network WALLY: Gebruikershandleiding (16 pagina's), Setup (20 pagina's), Gebruikershandleiding (2 pagina's)
Pagina afdrukken
- 1. Labeling Your Cables
- 2. Disconnecting Your Cables
- 3. Connecting the Cables to Your Replacement Receiver
- 4. Powering Your Equipment
- 5. Acquiring a Satellite Signal
- 6. Downloading Your Wally Software
- 7. Pairing Your Remote Control and Setting Your Wally Location
- 8. Setting Your TV Configuration
- 9. Testing Your Hopper Connectivity to the Internet
- 10. Activating Your Wally
- 11. Returning Your Original Receiver
4. Powering Your Equipment
a.
Make sure your TV cord is plugged into
a wall outlet and turn on your TV.
b. Plug the power cord from
your Wally into a wall outlet.
c.
Your screen should now display the
System Setup screen. If you do not
see this screen, confirm that you are
on the correct input for watching
DISH programming. Check the input
by pressing the Source/Input button
located on the side, back, or front of
your TV.