Acoustic Class D NEO Dymium Series Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustic Class D NEO Dymium Series. Acoustic Class D NEO Dymium Series 16 pagina's. Bass amplifiers
Pagina afdrukken
BASS AMPLIFIERS OWNER'S MANUAL
BN410
BASS CABINETS
Our custom Neodymium drivers are nestled into a real plywood cabinet for lighter weight and superior performance. Front or rear ports
allow for extended bass response, while a defeatable hi-frequency driver allows control of extended high end.
Available in 4 configurations:
BN410:
4X10" Neodymium speakers, 800W RMS/1600W peak power handling, 8 ohm impedance, front-facing shelf port
for extreme low end.
BN210 :
2X10" Neodymium speakers, 600W RMS/1200W peak power handling, 8 ohm impedance, rear facing port for a tight,
super-focused low end
BN115:
1X15" Neodymium speaker, 500W RMS/1000W peak power handling, 8 ohm impedance, rear facing port provides warm,
fat low end.
BN112:
1X12" Neodymium speaker, 400W RMS/800W peak power handling, 8 ohm impedance, rear facing port in a super-
compact enclosure for extreme portability. A perfect complement for our BN3112 combo.
2
1
14
www.acousticamplification.com
BN115
3
4
BN210
1. Horn On/Off Switch: Engages Piezo horn when in depressed position
2. Combo Locking Speaker Connector Jack: Connect amplifier head to
speaker cabinet via locking connector or 1/4" speaker connector
3. Parallel ¼" Speaker Jack: Connect amplifier head to speaker cabinet
via ¼" speaker connector. Can also use to connect another speaker
cabinet (in parallel) via additional 1/4" speaker cable connector.
Use left jack as input from amplifier head, and right jack as output to
additional cabinet.
4. 1/4" Speaker Input Jack: Connect amplifier head to speaker cabinet
via 1/4" speaker cable connector
BN112