3D Robotics X8 Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} 3D Robotics X8. 3D Robotics X8 8 pagina's.

Attach propellers

Remove the rings from the propeller

packages. Select the ring with the

smaller internal diameter, and insert

it into the back of the propeller hub.

Remove the nuts and washers from the

motors. For the front-left and back-right

arms, add SFP propellers to the top motors

and SF propellers to the bottom motors

with the writing facing towards the sky.

For the front-right and back-left arms, add

SF propellers to the top motors and SFP

propellers to the bottom motors. Make sure

the writing on the propellers faces the sky!

Place the washer over the propeller, and

secure the nut tightly on top. Always ensure

that the propellers are fastened tightly to

the motors before flying.

Connect the charger to the power

adapter cable and a wall outlet.

Connect the red cable to the + port

and the black cable to the - port.

Set the charger to LiPo and 3A.

SFP

LiPo

SFP

red

–

black