3D Systems 3D Sprint Installatiehandleiding - Pagina 3

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3D Systems 3D Sprint. 3D Systems 3D Sprint 10 pagina's. From file to print

INTRODUCTION

This guide will help you to install and run 3D Sprint™. It will also help you to ensure that your system meets the requirements to

run 3D Sprint™ and that the graphics driver is up to date. Please contact your local reseller for other questions concerning your PC

and installation of 3D Sprint. For information on how to use 3D Sprint, please see the Help documentation by pressing

application.

Follow these steps to ensure that your system meets the system requirements. For full system requirements, please open the

Requirements

page in the Help command.

2.1 Open System information

For Windows 7 or 8: First open the

For Windows 10: Open the

Check that the system meets the following requirements:

a. Windows 7 or later.

b. At least 2.0GHz Intel or AMD processor.

c. Has at least 4 GB of ram.

d. 64-bit operating system.

If your system does not meet these requirements, 3D Sprint may not run on your PC. Contact your local reseller for more

information.

2.2 Open the File Explorer

On the taskbar, open the File Explorer. In the left pane, click Computer. Check that the hard drive has at least 30 GB of free

space.

Except for installation, 3D Sprint requires additional space on the hard drive when running. This is for cashing temporary 3D data.

If your hard drive does not have enough available space, 3D Sprint may not run properly.

3D Systems, Inc.

Control Panel

from the Start menu. Click

Settings

from the Start menu. Click System, and then click About.

System and

in the

Security, and then click System.

Systems