arovec Apex300 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} arovec Apex300. arovec Apex300 20 pagina's. H13 true hepa air purifier

Pagina afdrukken
3.
Clean any remaining dust or hair inside air purifier with a vacuum cleaner, DO NOT
use water or any other liquid to clean the air purifier. [Figure 3.2]
4.
Remove the new filter from its plastic packaging, place it into the air purifier, and
close the filter cover properly.
5.
Plug and turn on the air purifier.
RESETTING THE AIR PURIFIER AFTER FILTER REPLACEMENT:
1.
If the filter was replaced after the (
-
Turn ON the air purifier.
-
Press and hold (
-
The (
) light should turn OFF, which indicates that the air purifier has been reset.
-
You can use the air purifier with the new filter.
2.
If the filter was replaced before the (
-
Plug in the air purifier after filter replacement, but do not turn ON the air purifier.
-
Press and hold (
-
Press and hold again (
complete.
-
You can turn on and use the air purifier with the new filter.
12
Figure 3.2
) light up:
) for 3-5 seconds
) for 3-5 seconds to light up the (
) for 3-5 seconds to turn OFF the (
) light up:
).
), the reset is now