3D Systems CUBE Les - Pagina 15

Blader online of download pdf Les voor {categorie_naam} 3D Systems CUBE. 3D Systems CUBE 15 pagina's. Replacing the print tip
Ook voor 3D Systems CUBE: Documentatie (8 pagina's), Gebruikershandleiding (20 pagina's)

Pagina afdrukken
3D Systems CUBE Les
Fastening the Print Tip on a Cube X
7. Using the 2.5mm hex driver,
tighten the print tip holding
bolt (pictured) to lock
the print jet in place.
With the print tip fastened you
can now turn on the CubeX
printer and start printing.
15