3D Systems Cubify CUBEX Trio Vervangingshandleiding - Pagina 7
Blader online of download pdf Vervangingshandleiding voor {categorie_naam} 3D Systems Cubify CUBEX Trio. 3D Systems Cubify CUBEX Trio 13 pagina's. Print jet replacement manual
Pagina afdrukken
Installing the new print jet
1. Check your Print Jet is assembled and that the print tip moves freely when
pushed in and out of the drive. The Print tip moves freely for the levelling
process. Once the levelling process has been completed the Print tip will be
locked off.
If your Print Jet and print tip are not assembled together when you receive them, you
can assemble them by inserting the locating end of the Print tip into the Print Jet as
pictured below.
7