3D Systems Figure 4 Standalone Setup - Pagina 4
Blader online of download pdf Setup voor {categorie_naam} 3D Systems Figure 4 Standalone. 3D Systems Figure 4 Standalone 4 pagina's.
Ook voor 3D Systems Figure 4 Standalone: Snelstarthandleiding (2 pagina's)
Pagina afdrukken
Figure 4 Standalone
Please see the Figure 4 Standalone User Guide, found on the support.3dsystems.com/figure4standalone, for safe-
ty information and comprehensive operating instructions.
Save all foam and packing material for future use. Shipping without the original packing material may
cause damage to the printer.
12. Select Print Mode
2
1.
Select 50 Micron for this test build
2.
Click the Set button.
See the 3D Sprint Help menu
for more information on
Print Modes.
®
13. Select Build Style
1
2
1.
Select Draft for this test build.
2.
Click the Set button.
See the 3D Sprint Help menu
for more information on Build
Styles.
Other Useful Documents
Please visit
support.3dsystems.com/figure4stand-
alone
for up-to-date versions of the following docu-
ments:
Figure 4 Standalone User Guide - See full details
regarding safety, facility requirements, post-
processing instructions, and more for your printer.
SDS and User Guide - User Guides ship with each
material. These and SDSs are also available on
https://www.3dsystems.com/materials.
3D Sprint Online Help - Launch online help by press-
ing F1 or clicking the
Setup
14. Initial Print Guide
1
Continue to the
which is packed in with your printer.
This guide will show you how to print a
verification build.
icon while in the software.
©2018 3D Systems, Inc. All rights reserved.
Initial Print
Guide,
P/N 42-D018 Rev. B