disperator 8075 Installatie-, gebruiks- en onderhoudshandleiding - Pagina 6
Blader online of download pdf Installatie-, gebruiks- en onderhoudshandleiding voor {categorie_naam} disperator 8075. disperator 8075 13 pagina's. Waste compactor
Installation procedure
Remove the disc from the foil pouch. Swing
open the odor control disc door, and place
disc face down on tray so that the GREEN
month "1" is visible in the window when the
disc door is closed.
After a month has passed, rotate the disc from
right to left using a finger. Repeat every month.
On the sixth month, the label in the window will be
red, indicating that the odor control disc needs to
be replaced
after 30 days.
Replacement odor discs are available from
DISPERATOR.
2.4 Install Waste Bag
With the door open and the waste container
extended to the furthest position, place a bag into
the container. Fold the bag over the top rim of
the container on all sides. Press the bag into all
corners of the container and
smooth the bottom.
Smooth and shape the bag
carefully. This will prevent
the bag from being torn by
the compacting plate during
3. Operation
3.1 Compacting
The compactor is now ready to use.
For best results, always fill each new bag
completely in the container before operating the
compactor. Doing so will minimize bag pull-up
and tearing.
Please see picture on front page of this manual
and proceed as follows:
a) Slide waste container completely into the
compactor cabinet.
b) Turn key lock switch to "ON"-position.
c) Select one of the two compact modes as
described below by pushing the compact mode
button to "Normal" or "Hold".
Normal compact mode
After the door is closed and the start button
is pressed, the compacting plate will travel
downward into the waste container and compact
the waste. At the bottom of the plate stroke, the
compacting plate automatically reverses and
moves upward out of the waste container. Total
cycle time will be 45 secs. or less. At the top of
the stroke, the compactor automatically shuts
itself off and is ready to receive more waste.
Hold compact mode
After the door is closed and the start button
is pressed, the compacting plate will travel
downward into the waste container and compact
the waste.
operation.
Secure the bag in
place over the two
buttons on each side
of the container.
The bag has
pre-punched holes
for this purpose.