arper OELL Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} arper OELL. arper OELL 7 pagina's.

Pagina afdrukken

environmental impact.

Maintenanace: Dust and the most common stains can be removed

using a well-diluted solution of water and neutral soap. It is

absolutely necessary not to use commercial stain removers for

cleaning. To avoid scratching, use a soft cloth and clean with

gentle, circular movements (especially the opaque finishes, if

subjected to action that is too aggressive, may develop shiny

halos in spots). Do not use waxes for furniture or floors, solvents

or abrasive products. Always dry the surfaces with a dry cloth. Do

not use the pressure washer or high-pressure water, which may

damage the surface of the wood. In case of doubt, test the

cleaning solution on a part hidden from view to verify the result,

waiting at least 24 hours for any problems to arise. Immediately

remove any liquids spilled on the surface of the wood, avoid the

accumulation of water or other liquids that could damage the

product.

Wood can have impurities and imperfections, which fall within

accepted quality standards, and should be considered as

distinctive features that attest to its natural beauty. Periodic and

correct maintenance extends the life of the product.

Plastic Materials:

Regularly plastic surfaces dust using a microfibre cloth. Dust and

common domestic stains can be removed using a cloth or sponge

that has been dampened in tepid water or water with some well-

diluted neutral detergent in it.

Do not use commercial stain removers or aggressive products for

cleaning. In order to avoid scratching the products, use a soft cloth

and clean using circular movements. Under no circumstances

should you use solvent-based detergents or abrasive products. If

you have any doubts, test the cleaning product on a discreet area

in order to check its effect. Wait for at least 24 hours to see if any

problems arise.

Chrome-plated, anodised or painted metal surfaces:

Clean using specific products such as regular detergents for

domestic surfaces diluted in tepid water, provided they are not

abrasive and do not contain acid or bleach. Avoid using sponges

and scourers made from synthetic fibre or metal as these could

permanently mark surfaces. After cleaning, rinse products care-

fully to prevent traces of detergent from reacting with the surface

finish to avoid dulling or oxidisation. After cleaning, dry with a

shammy cloth. The use of polish on chrome-plated or painted

surfaces is not recommended. These products should always be

used with caution and only be experts as their abrasive qualities

could irreparably damage surfaces. If you have any doubts, test

the cleaning product on a discreet area in order to check its effect.

Wait for at least 24 hours to see if any problems arise.

Care instructions

Stainless steel:

Clean on a regular basis (every 15-20 days) using a soft damp

cloth or common products specific for stainless steel.

Table Tops:

Clean and remove any substance that accidentally comes into

contact with the surface as quickly as possible using a damp cloth

or microfibre cloth and some neutral detergent diluted in tepid

water. Always dry after cleaning. Aggressive detergents containing

bleach or abrasive detergents (such as bathroom cream cleaner)

must never be used. Take care not to rub too hard in order to

avoid scratching the surface. Avoid using sponges or scourers

made from synthetic fibres or metal.

If you have any doubts, test the cleaning product on a discreet

area in order to check its effect. Wait for at least 24 hours to see if

any problems arise.

Glass surfaces

The tempered glass used by Arper ensures high levels of safety.

In the event of a breakage, the glass smashes into tiny, rounded

fragments which will not cause a cut. In any case, you should

avoid hitting the glass with hard or sharp objects and the glass

should not be exposed to extreme shifts in temperature (i.e. do not

place very hot or cold items on it).

Regularly dust glass using a microfibre cloth. Clean using specific

products or neutral soap applied using a soft, clean cloth. Do not

used powered detergents or abrasive detergents that could

scratch the glass, causing irrevocable damage to the surface. If

you have any doubts, test the cleaning product on a discreet area

in order to check its effect. Wait for at least 24 hours to see if any

problems arise.

Marble surfaces:

Clean and remove any substance that accidentally comes into

contact with the surface as quickly as possible using a damp cloth

or microfibre cloth and some tepid water or a specialist detergent.

Always dry immediately after cleaning. Take care not to rub too

hard in order to avoid scratching the marble. If you have any

doubts, test the cleaning product on a discreet area in order to

check its effect. Wait for at least 24 hours to see if any problems

arise.

Marble is a calcareous, porous material that is susceptible to

reactions with acidic substances. Marble can absorb fatty or oily

substances and colourants. These can soak into the material and

stain the surface. During use, you are advised against using

objects that can scratch or cause abrasions to the surface, such

as acidic products (Coca Cola, vinegar, acidic detergents) and

colourants (wine, coffee, fruit, sugary liquid, tomato sauce, very

hard water etc.).