Aerial AD 810 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Aerial AD 810. Aerial AD 810 14 pagina's.

The smooth setting option of the hygrostat makes a very convenient humidity

control possible for you. If very precise values are requested, you should match the

hygrostat with the information on a precise hygrometer.

Please consider:

Humidity values of a minimum of 40 % - 45 % r.h. can be achieved with a

condensation dryer. An adsorption dryer is to be employed if lower values are

required.

For this purpose, ask your technical consultant.

Optimal climate:

For living rooms, environmental conditions of 20°-25°C and 50 - 60 % r.h. are

recommended.

For building drying, the hygrostat becomes turned at continues running (POS. I).

In the case of the drying rooms with wood equipment (e.g. floors) or paintings,

antiques and similar things should not be fallen below a humidity of 55%.

Ask your technical consultant in the case of special applications.

6.5 Condensate removal

The dehumidifier AD 810 is serially equipped with a built in condensate pump.

The condensate pump is placed below the air filter, behind the back plate.

In the back plate a connector and a button is placed. Afitting connection piece is

included with the delivery.

a) Taster zum

manuellen

Abpumpen

Connection piece:

At the hose connector you can connect a hose 12 x 2 mm directly. Alternative the

hose can be connected at the connection piece (see following picture). That

connection piece can be fixed and removed again at the hose connector very easy.

ATTENTION:

Make sure that the condensate can always be handled safely. Fix the end of the

hose in a sump!

page 8 of 14

b) Stecknippel

zum Anschluss

des

Ablaufschlauches