displayit Graffiti:Plus Wall - Kit A Montage-instructies - Pagina 5

Blader online of download pdf Montage-instructies voor {categorie_naam} displayit Graffiti:Plus Wall - Kit A. displayit Graffiti:Plus Wall - Kit A 5 pagina's. 10’ x 10’ inline display kit

Pagina afdrukken

Adjustable

feet

1. Expand the frame with

the adjustable feet pointed

down.

Endcap

Channel

bar

"X" Shaped

Strap goes in back

Front

Vertical

Channel

Bar

Front

Horizontal

Channel

Bar

Diagram showing the locations

of the channel bars required.

8. Connect the power supply

to the bottom of the curtain

light. Plug the power cord in

and test the lights.

displayit.com

Backlit Counter-to-Go

2. Lock the two metal

support brackets to

secure the frame open.

Rear

Vertical

Channel

Curtain Light

Bar

down

5. Unroll the curtain light and

swivel the four hooks 90 degrees.

9. Install the front wrap-around graphics and the back graphics.

See the following page for detailed graphic installation.

Set countertop on top (making sure the frame nubs go into the

recesses). Plug the power cord in to light up the display.

800.207.0311

After-Hours Emergency: Call or Text 678.723.5343

Corner Hub

Thinner Edge

3. Install the 4 front channel

bars and rear 4 back channel

bars. The thinner edge goes

toward the inside of the frame.

Hook

LED Lens

Power In

6. Rotate the hooks to face the

same direction as the LED lenses.

10' x 10' Inline Display Kit A

Assembly Instructions

Channel Bar

4. Snap the four endcap

channel bars to the top and

bottom sides of the frame.

7. With the "up" sticker facing

toward the top of the frame,

mount the clips to the frame so

the hooks are facing outward.

Stretch the bottom hooks down

and hook them onto the frame.

Bag Packing Instructions

Curtain Light

(Inside Small Pocket)

Countertop

(Under Flap)

Gra ti:Plus V.2 Updated 10/10/2019

Channel Bars

(Inside Larger Pocket)

Frame

Endcap

Channel Bars