Abbott i-STAT Technisch bulletin - Pagina 8
Blader online of download pdf Technisch bulletin voor {categorie_naam} Abbott i-STAT. Abbott i-STAT 12 pagina's. Wireless analyzer
Ook voor Abbott i-STAT: Gebruikershandleiding (11 pagina's)
Pagina afdrukken
B. Transmitting Data Wirelessly Using the Transmit Data Menu
1. Press
to turn on the handheld.
2. Press
M NU
to change screen to Administration Menu.
3. Press
(Transmit Data).
6
4. Press the number key corresponding to the data set you would like to transmit.
A Waiting to Send message will appear on the display screen.
The State line toward the middle of the screen may display a series of messages
as shown below or indicate that it is connected.
Off: the wireless module is off
•
Booting: loading software on wireless module
•
Joining: attempting to join the network
•
Associated: module successfully joined the network, associated with an
•
Access Point, and has been granted permission to communicate
to the network
Connected: connected to the data manager
•
5. Once the Connected state is reached, a Communication in Progress message will appear
at the top of the screen. When this message disappears and the display returns to the
Administration Menu, the transmission is successful.
Note 5.1: there are two additional parameters on this page which may aid the users in
troubleshooting and assessing the strength of the wireless transmission signal.
Signal: indicates the strength of signal in one of three terms:
•
– Weak
– Medium
– Strong
Additionally, an actual numeric measurement of the signal is displayed. If users are obtaining failed
transmissions when the signal strength is weak, they should re-attempt the transmission in a location
that provides a signal strength of Medium or Strong.
SNR: (Signal to Noise Ratio): This is a measurement of a difference between the strength of the wireless
•
signal and the background noise level.
Note 5.2: If there are unsent results remaining in the handheld at the completion
of a transmission attempt, a Communication Ended message will
appear on the handheld indicating how many unsent results are left.
8
Art: 726025-01A
Transmit Data
1 - Most Recent
2 - This Month
3 - Last Month
4 - All
5 - Unsent
Waiting
To Send
Status
State: Connected
Signal: Strong
-45dBm
SNR: --dB
1 - Cancel
See Note 3.2
on page 7
Communication
In Progress
Status
State: Connected
Signal: Strong
-45dBm
SNR: --dB
1 - Cancel
See Note 3.2
on page 7
Communication
Ended
Unsent: 4
1 – Continue
Rev. Date 24-NOV-14