Displays2go GTTCCT01 Gebruiksaanwijzing en instructies - Pagina 3

Blader online of download pdf Gebruiksaanwijzing en instructies voor {categorie_naam} Displays2go GTTCCT01. Displays2go GTTCCT01 5 pagina's.

One person chooses a hard, flat surface to start building the Tower. To set up the

game, lay 3 blocks next to each other, along their long sides, on a hard surface

to complete the first row. Start the next layer by placing 3 more blocks next to

each other at a right angle to the blocks on the previous row. Continue doing this,

building layers of 3 blocks, until all the 54 blocks are stacked.

1. Insert 1 AA (1.5v) battery in compartment in bottom of timer.

2. Turn the clock ON, by switching the ON/OFF switch to ON, on the bottom of

the timer. Once on, the screen will display 0:00:00. The clock will be in a positive

timing position when turned on. To change the timer to a countdown timing screen

mode, press the middle button for 2 seconds.

3. The hour button for Player 1 will now be flashing, change the hour to 0 by

continuously hitting the – button, until the clock says 0. Briefly touch the middle

button again and the minute button will start flashing. Set the number of

minutes you want each player to have, by touching the + or - sign

SET UP INSTRUCTIONS

TIMER SET UP

to get the desired number. Repeat these steps until all numbers

on the clock have been set. Once the last digit is chosen,

hold the middle button for 2 seconds again to lock in

your desired playing time. The lower the time you set

on the clock, the faster the game needs to be played.

4. Turning the clock off and on again sets

the clock back to the last time. In order

to get back to the factory setting, briefly

take out the battery.