Displays2go CFSTN2B Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Displays2go CFSTN2B. Displays2go CFSTN2B 11 pagina's.

Adjust upper and lower poles

Locate the spring plungers inside the bottom grommet hole of pole

B1 (If your unit has B3 cross bar pre-installed remove prior). Starting

with the right side pole B2, push the spring plunger down and pull

B2 up slightly and twist it slightly so that the spring plunger remains

Hold the poles B1 & B2 with your hands and use your left foot on

the cross bridge of B1 for stability . Pull B2 upward until you reach

your desired height . Twist B2 so that the spring plunger locks into

Repeat the same steps for the left side pole B2 but use your

right foot for stability instead . Align poles B2 and lock the spring

Spring

plunger

Lift pole assembly so that the part remains upright and the

cable management holes are facing toward you.

Spring

plunger