Aerial Ascent 2.0 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Aerial Ascent 2.0. Aerial Ascent 2.0 7 pagina's.

steP 4

steP 5

steP 2

STEP 6

After confirming (double check) that your measurements are cor-

rect, secure all three bars and the tow bar in the correct position.

To do this you will need to drill (using a 5/8" drill bit) 4 holes through

the two vertical bent bars aligned with the pre-drilled holes in the

top cross bar. Then take the four supplied M10 bolts and nylon lock

nuts, and connect the three tower sections together.

Attach the tower fittings and mounting feet to the tower legs using

the bolts provided and secure these with an allan wrench.

Bring the assembled portion of the tower up and over the rear

mounting area and position the mounts over the marks that you

made in step 2.

now mark the drill locations using the mounting pad as a template.

GUIDE#: BT-ascEnT-001