Acoustic Control Gamma Series Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustic Control Gamma Series. Acoustic Control Gamma Series 5 pagina's.

Acoustic Control Gamma Series Gebruikershandleiding

FRONT PANEL

1
2
3
4
5
FRONT PANEL
1. INPUT
Connect your guitar here. If using any effects
pedals, connect your guitar to those, and then
connect the output from the last pedal to this
jack.
2. VOLUME 1
Sets volume for the wide-open clean BLUE
CHANNEL.
3. 1/2 CHANNEL SELECT
Selects Channel 1 (blue LED is lit) or Channel
2 (red LED is lit). Disabled while rear panel
CHANNEL SELECT FOOTSWITCH jack is
connected.
4. VOICING
Select one of the 4 voices for Channel 2 here,
then turn knobs to the right to adjust sound and
volume.
5. DRIVE
Turn to minimum for cleanest sound for selected
voice, turn up to increase drive and distortion.
Does not affect BLUE CHANNEL.
4
| GAMMA SERIES Electric Guitar Amps
6
7
8
10
9
6. VOLUME 2
Sets volume for Channel 2. Does not affect
BLUE CHANNEL.
7. BASS, MID, TREBLE
These knobs adjust tone, affecting both
channels. For the standard tuning, turn the
knobs so the white lines are pointing straight up.
Turning a knob lower reduces that tone range.
Turning higher increases it.
8. AUX IN
Connect audio cable from smartphone, laptop
or other source.
9. BLUETOOTH
Press On/Pair for one second to activate
Bluetooth pairing. Press Off to disable Bluetooth.
Blue LED flashes when pairing, and lights solid
when paired.
10. PHONES
Connect earbuds or headphones here, speaker
will be disabled.

REAR PANEL

11
11
REAR PANEL
11. POWER
Connect included power cable from power outlet
to this power jack, and flip switch on. If amplifier
will not power on and you suspect its fuse may
have blown, turn off the power switch, unplug
the power cord from the amplifier and open the
fuse compartment under the power jack using a
small flat blade screwdriver. If metal strip in fuse
is broken, replace with fuse type indicated on
rear panel.
G25 & G50 OWNER'S MANUAL
12
12
12. CHANNEL SELECT FOOTSWITCH
Connect a latching footswitch here for channel
3
select control. Front panel 1/2 (Channel Select)
switch is disabled while footswitch is connected.
G25 & G50 Owner 's Manual |
5