3D Systems Touch Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D Systems Touch. 3D Systems Touch 17 pagina's. 3d stylus hands on design
Ook voor 3D Systems Touch: Gebruikershandleiding (19 pagina's)

Pagina afdrukken

Plug the

power cord

into an available

status light on the power supply indicates that it is working correctly.

power supply connector

Plug the

Make sure that the

LEDs ring

the problem continues, contact 3D Systems customer support.

3D Systems, Inc.

outlet

(for 110V the outlet must be rated for at least 2 Amps, for 220V: 1 Amp). The Green

back of the Touch

into the

at the base is lit

Blue.

Blue indicates the Touch has power. If it is not, check all of the connections. If

device.