DISTELL Fish Fatmeter Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DISTELL Fish Fatmeter. DISTELL Fish Fatmeter 2 pagina's.
Pagina afdrukken
Fish Fatmeter Quick‐Start Guide
Welcome to your new Distell Fish Fatmeter.
This quick‐start guide is designed to get you up and running with your Distell Fish Fatmeter quickly and
easily.
The Fatmeter is a complex piece of scientific equipment, however, so
we do recommend that you take time to read the User Manual so
that you can understand how to get the best out of your meter.
We also recommend that you take some time to read over our
website at http://www.distell.com where you can find a lot of
information on how the meter works as well as a list of Frequently
Asked Questions.
If you have any problems then you can contact our support department via the website or using these
details:
Distell, Old Levenseat, Fauldhouse, West Lothian EH47 9AD, UK
Phone: +44 (0) 1501 770124 Fax: +44 (0) 1501 7702424 Email: [email protected]
1. The Fatmeter kit
USB cable
Fatmeter
Charger /
power supply
CD ROM
Check pad
Each kit includes an advice note that lists the kit contents. Please check your Fatmeter kit carefully and if any
items are missing or damaged then please inform either Distell or the distributor where you purchased the meter.
Carry case
Printed items: User
manual, calibration charts,
calibration certificate, etc.
2. Your new Fatmeter
Read / Yes
button
Data / charging
socket
3. Charging the batteries
Connect the power
supply to the meter
socket. A full charge
can take up to 12
hours.
4. Switch on
using the power switch.
Making choices with
the Yes / No buttons.
Reset / No
button
Power switch
Display
samples to make
an average value.
Switch the meter on
Press Read / Yes to
take readings.
5 minutes
Allow 5 minutes for the meter
to stabilise after power on.
Sensor head
12 hours
Selected
calibration
Number of
Press Reset / No to
enter the menu.