Acoustic Energy Aego BT2 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustic Energy Aego BT2. Acoustic Energy Aego BT2 12 pagina's. Bluetooth loudspeaker
Pagina afdrukken
t r o u B l e s h o o t I n g
the speaker will not power on
- Check there is power available to the speaker or the battery has charge
the speaker will not connect
- Ensure that the BT2 is in pairing mode with the blue light flashing
- Ensure Bluetooth is enabled on your partnering device and that it is not
connected to something else
- Ensure you are within three to four metres of the BT2
- The system will show as "AEGO BT2" in available connections on your
Bluetooth enabled device, if it does not, exit and re-enter the Bluetooth
menu, waiting a few seconds for "AEGO BT2" to show
- Turn the BT2 off and then on again
there is no sound
- Check there is power to the BT2 and it is switched on
- Check the BT2 is paired and there is a solid blue light
- Check that the volume on the BT2 is not at zero
- Check that the volume on the connected device is not at zero
the sound is intermittent or distorted
- Check you are not too far away from the BT2
- Check that the levels from your source equipment are not too high and
causing the speaker to cut out or distort
- If you are using a streaming service, check that the stream itself is stable
Volume levels are too low
- If you are using an Android, Blackberry or Windows device, check that the
volume control on the BT2 is not set to a low level, the volume will only
be as high as this setting
- Check that the connected device is not set to a low volume level