Acoustic Energy Aegis Neo Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustic Energy Aegis Neo. Acoustic Energy Aegis Neo 8 pagina's. Acoustic energy aegis neo subwoofer owners manual

Pagina afdrukken
Diagram One
Left
Front
Sub-woofer
Viewing/listening position
Left
Surround
Alternative
or Extra Left
Surround
5. Connecting
The Aegis Neo Subwoofer requires connection both to mains power and an
appropriate audio signal. The connection sockets are located on the back panel
illustrated opposite in Diagram Two. Leave the subwoofer switched-off at the
mains until all connections are made and ensure that the
also located on the back panel, is turned fully anti-clockwise. Connecting your
Aegis Neo Subwoofer to an audio signal is a simple process, however, there are
some choices to be made concerning connection mode.
Signal Input Connections
Aegis Neo Subwoofer is fitted with an unfiltered mono
and a standard stereo pair of filtered
The
AV Subwoofer Line Input
is intended for connection to an audio-visual
processor LFE (low frequency effects) output. As the LFE output of audio-visual
processors is already low-pass filtered, the subwoofer's crossover filter is bypassed
by the
. The
AV Subwoofer Line Input
signals connected to the
AV Subwoofer Line Input
The stereo
Line Inputs
are intended for connection to preamplifier or other similar
line outputs. The left and right inputs are combined to mono within the subwoofer.
Connect to the input sockets using an appropriate RCA Phono connection cable.
Ensure that the cable is of good quality.
Signal Output Connections
RCA Phono Line Level signal output sockets are fitted to the Aegis Neo Subwoofer.
They carry an output signal identical to the input signal and may be used to
transfer the signal back to a power amplifier or to connect multiple subwoofers.
Page
Right
Front
Centre
Right
Surround
Alternative or
Extra Right
Surround
Volume Level
control,
AV Subwoofer Line Input
Line Inputs
.
control has no effect on
Crossover Frequency
.
Diagram Two
70Hz
55Hz
85Hz
VOLUME
NOTCH
LEVEL
FREQUENCY
MIN
MAX
40Hz
100Hz
105Hz
75Hz
135Hz
CROSSOVER
NOTCH
FREQUENCY
SLOPE
45Hz
150Hz
MIN
MAX
90°
-6dB
45°
135°
-3dB
-9dB
NOTCH
PHASE
LEVEL
0°
180°
0dB
-12dB
AUTO
OFF
ON
POWER
AV SUBWOOFER LINE-IN
LINE IN RIGHT
LINE IN LEFT
LINE OUT RIGHT
LINE OUT LEFT
POWER INPUT
120/240V 50/60HZ
No user serviceable parts inside.
Consult Owners Manual before use.
Operate in accordance with
Manufacturer's instructions.
If in doubt refer to qualifi ed service personnel.
Not suitable for wall mounting.

Mains Connection

After checking that the mains voltage specified on
the subwoofer rear panel is set correctly, connect
the subwoofer via its IEC mains input to a mains wall
socket. Use only the mains cable supplied with the
subwoofer.
S U B
200 Watt Act
Designed and
Acoustic Energ
Made in
MAINS
VOLTAGE
SELECTOR
Risk of ele
Do not op
FUSE
Risque du ch
230-240V : T1.6AL 250V
Ne pas ouve
115-120V : T3.15AL 250V
W
Serial
CAU
ATTEN