3d-printz Naughty 2000 Gebruiksaanwijzing - Pagina 5
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 3d-printz Naughty 2000. 3d-printz Naughty 2000 9 pagina's.
Pagina afdrukken
The flaps are attached with TPU hinges in the slots provided using CA. First check
whether all slots are free and the TPU hinges can be inserted without problems.
Then insert the hinges into the slots with a little superglue, without accelerator, so
that the position can still be corrected if necessary (thick superglue dries more
slowly). Use the accelerator only when everything fits perfectly and can be moved
freely!
fuselage
The fuselage parts FusLW 1-4 can be glued using CA, the 8mm carbon tube serves
as a guide rail. Do not glue the carbon tube to the fuselage yet! Insert an M6 nut in
the recess provided (at the wingjoint) and glue it if necessary, then glue the entire
surface of the fusplate to the fuselage.
Now the frontpart of the fuse can be assembled, first the cockpit – glue with CA: