3D3 MINI A1121 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D3 MINI A1121. 3D3 MINI A1121 8 pagina's. Universal 3d tv eyewear

prepare for installation

Ensure that only the TV you wish to use with the

3D3 Eyewear is switched on.

Set the TV to 3D mode (refer to the TV operating

instructions).

Stand less than 1 metre from the TV.

installation

With the 3D eyewear switched off, press and hold the

function button for five seconds. The indicator light

will flash until the 3D signal is detected and then

extinguish. You should now be viewing 3D images.

If the 3D signal has not been detected, check that

there is nothing blocking the signal from the TV to

the eyewear and repeat the process.

charging

When the battery is low, the blue indicator light will

flash for approximately five seconds when switching

on. Connect the supplied cable to the charging port

and the other end to any suitable USB charger or port

on a TV, laptop or desktop computer. The indicator

light will illuminate red until fully charged and then

extinguish.