abc Fleck 5600SXT Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} abc Fleck 5600SXT. abc Fleck 5600SXT 13 pagina's. Water softener with upflow carbon tank

Pagina afdrukken

4. Open garden hose valve slowly to begin filling the tank (takes

a few minutes). Once a steady trickle begins pouring from the

opposite port, increase the water pressure. Do this for about

15 to 20 minutes until water flows clear.

* Installers Tip: Once water looks clear, hold your hand under the flow-

ing water. Your hand will contrast against faint traces of sediment and

5. Now it's time to switch rinsing directions. Position the

help you see when the water is fully rinsed.

water hose in the opening of the opposite port and begin filing.

Continue rinsing until water runs clear. The rinsing phase is

now complete.

Step 4 – Assembling elbows

Step 5 – UPFLOW configuration:

This is the standard fitting included with the package. To

plumbing can be coming from below, the top or even the side.

accommodate various plumbing types, alternate fitting

configurations are available and assemble identically to the bypass

valve.

Do not use a wrench to tighten fittings and parts. Using a wrench

to tighten will crack the plastic. Only hand-tightening is needed.

Assembling the two male pair 1"

male treaded elbow adapters. You

will be placing the nut followed

by the white slip ring. Push the

white slip ring down to the in-

ner most groove. Next, slide the

split ring onto elbow, placing in

last groove. Repeat for remaining

elbow.

1. Lube O rings.

2. Fit the elbow adapter end

with the O-rings onto the bypass

valve, tighten the easy connect

nuts. Repeat with other elbow

assembly.

Note: The elbows are configured to

be used in any direction. Household