Acoustic Image Ten2 EX Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acoustic Image Ten2 EX. Acoustic Image Ten2 EX 8 pagina's. S4plus
Ook voor Acoustic Image Ten2 EX: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (12 pagina's)
Pagina afdrukken
Room Coupling Control
The Room Coupling Control is also located on the rear panel of the speaker
cabinet. It is used to control the low frequency output of the downfiring woofer. It
is useful in controlling "boominess" in difficult acoustic settings. It is a three
position switch with settings of 100%, 75% and 50%. At the 100% setting, the
downfiring woofer is operating at full output. At the 75% setting, it's output is
reduced slightly. Use this setting when there is only moderate boominess in the
room. At the 50% setting, the output is reduced even more. Use this setting for
the most difficult situations. Experiment with the control so you can get a good
idea of its effect on the sound.
Description of the Ten2 EX
The Ten2 EX is the speaker cabinet portion of the Ten2 combo. It is about 3
inches shorter and about 5 pounds lighter than the Ten2 because the docking
bay for the amplifier is not attached and the amp head is not provided. It has the
same speakers and the same performance as the Ten2. It is the ideal extension
cabinet for the Ten2 but it can also be used effectively with any of our other 1x10
combo amps. In fact, the other combos can be stacked on top of the Ten2 EX to
create a 3x10 system.
Care
Acoustic Image combos and cabinets are made from injection molded polymer
materials. A little care will keep yours looking new for years to come. Use a
clean, dry cloth to clean the cabinet and metal parts of the amplifier.
Warranty and Repair
We stand behind our products with a full warranty of five years from the date of
purchase. Should a problem arise, please call us before returning your
amplifier or enclosure. Naturally, our warranty does not cover products that
have been damaged through misuse. Be sure to check our web site regularly,
we have an FAQ section and we post helpful information for getting the most
out of your Acoustic Image product.
Warranty Information
Serial Number _______________
Acoustic Image
5820 Triangle Drive
Raleigh, NC 27617
10
Phone: 919-785-1280
Fax: 919-785-1281
www.acousticimg.com
Specifications
System
Frequency Response
30 Hz - 20 kHz (40 - 16 kHz ±3 dB)
Max SPL
>116 dB at 1 meter
AC Power
115V/60 Hz or 230V/50 Hz, switchable,
Japan version is 100V, 50/60 Hz only
Size
17" H x 15" W x 13" D, 14"H (EX)
Weight
28 lbs, 23 lbs (EX)
Preamp (Mic and Instrument Inputs through combo jack)
Mic Input
600 ohm balanced, XLR connector,
switchable 10 dB pad
Phantom Power
47 volts, on/off switch w/LED indicator
W
Instrument Input
1 M impedance, 1/4 inch jack
Direct Out
+4 dB, balanced, XLR connector, ground lift,
pre/post EQ selector
Effects Loop
Parallel type with return level control
Bass Control
Shelving type, ±15 dB at 60 Hz
Mid Control
±15 dB at 650 Hz
Treble Control
Shelving type, ±15 dB at 10 kHz
Low Cut Filter
-12 dB/octave sweepable from 30 to 400 Hz
Phase Reverse
Switchable 180 degree phase reversal
Effects
Type
Digital with 6 presets and level control
Program Presets
3 reverb (hall, room, plate), delay, ambient
chorus, flange
Power Amp
Topology
Class D (PWM)
Switching Frequency
250 kHz
Output Power
>450W at 8 , >800W at
(internal speaker is 4 )
External Speaker Output
Neutrik Speakon type (pole 1), 2 min
load including internal speakers, if connected
Speaker System
Woofer
Dual 10 inch, one downfiring with level
control, one forward firing
Tweeter
2.5 inch forward firing with attenuation control
Crossover
Passive, alignment corrected
W
Impedance
4
Power rating
600W
Supplied Accessories
Fitted slip cover with cord storage pocket
and shoulder strap
Available Accessories
Padded gig bag with shoulder strap made by
Mooradian,
removed to an extension cabinet (adapter,
filler panel, padded case for head)
11
W
W
W
4
, >1000W at 2
W
W
kit to convert cabinet with head