CAME A 3124 Installatiehandleiding - Pagina 7
Blader online of download pdf Installatiehandleiding voor {categorie_naam} CAME A 3124. CAME A 3124 12 pagina's. Automation for swing gates
Pagina afdrukken
Carter
Unscrew the two securing screws and remove the stem.
M8 self-locking nut
N.B.: we suggest lubricating (using neutral grease) the endless screw and the bushing upon installation.
5.6 Electrical connections to the ZL19 control panel
Motor 1
Motor 2
N - M
Connection to motor
F - Fa
Microswitch-limit switch of motor on aperture
Endless screw
M8x10
M8x50
N
M
F
F
A
N1 M1 C Fa1 Rc1 C Ra1
N2 M2 C Fa2 Rc2 C Ra2
Unscrew the two securing screws and remove the carter.
Begin mounting the gearmotor to the two brackets.
R
R
R
C
A
Motor terminal block
Control panel terminal block
ZL 19N
R - Rc
Microswitch-deceleration of motor on closure
R - Ra
Microswitch-deceleration of motor in aperture
Stem