CAME AMICO-S24 Handleiding voor snelle installatie - Pagina 5

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} CAME AMICO-S24. CAME AMICO-S24 12 pagina's.

AMICO:

Preliminary checks

1. Check that the gate structure is sturdy enough, the hinges work efficiently and that there is

no friction between the fixed and moving parts

2. Make sure that measurement

3. Make sure that you have fitted opening and closing mechanical gate stops

Side hung gate GEOMETRY

Opening

A (mm)

90°

130

120°

130

•

Lubricate the bushing and fit it into one of the holes on the post bracket.

•

The bracket holes allow the opening angle to be changed.

Bushing

Tail joint

GEOMETRY

does not exceed the value shown in the reference table

B (mm)

C (mm)

130

110

Screw M8 x 35

Nut UNI 7474 M8

E (mm)

•

720

•

OUTward OPENING gates

For outward opening gate geometry

please refer to the full Installation Manual.

Bushing

The greater the motor angle, the greater

the opening speed and the slower the

gear motor's thrust.

The smaller the motor angle, the slower

the opening speed and the greater the

gear motor's thrust.

Washer

Nut M12

Tick

Attachment pin

Slotted hole