CAME RODEO Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} CAME RODEO. CAME RODEO 7 pagina's. Automation system for sliding doors with microprocessor control

Pagina afdrukken

INSTALLATION OF ACCESSORIES(avai~~~le u~_o~_ r equest)J

MA7012 • Electric lock

Electro-mechanical

system for locking the door wings, with gravity-powered

electric unlocking system_ Thisdevice locks the doorwing(s) in the closed position (and/or in the open position)

by engaging a bracket installed on one of the trolleys_

By using dip switches 7 and 8 (10-way module), the electric lock can be programmed to operate as follows:

_ ~-

~ __

IONI II II II II II .•

l1'tlltlitJltl[JtI~. CJtl

1.2

.. .3

MI1010 - Spring-loaded

Mechanical device to open the doors, made up of a spring-loaded system which operates without electric

power supply. With this device, use the dip-switches as indicated.

DIP SWITCH

10.WAY

7 ON

8 ON

7 OFF

8 ON

7 ON

8 OFF

7 OFF

8 OFF

Anti-panic

device

DIP SWITCH

4.WAY

Deactivated_ Use this selling when the electric lock is.

not installed.

Locking

with doors closed. This is normal operation:

the unit locks on closure and is released electrically when

the open command is given_ This is the default setting.

Locking

with doors closed and open. The unit locks

both when open and closed (when positioned correctly

and is released electrically by each open and close

(1)),

command.

Delayed locking.

The electric lock is unlocked when

the first -open" command is given at initial start-up or

after a power failure. or when "door open" is selected

on MA7041. The lock is locked when "door closed" or

.output only. is selected on MA 7041.

4 ON

Activation of constant push while closing.

(1 O-way dip switch)

1 ON

Activation of spring-loaded anti-panic device.

(4-way dip switch)

mechanical locking action and