CAME BPT Agata C200 UK Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CAME BPT Agata C200 UK. CAME BPT Agata C200 UK 16 pagina's.

The HTS recessed box must be walled in

flush with the wall at a suitable height, using

the spacer provided in order to avoid any dis-

tortion of the box 1.

In systems where the Larsen effect might

occur, the microphone can be mounted re-

motely 4.

To remove the microphone from its

housing, pry it off its base using a small

screwdriver, taking care not to damage

the cabling 2.

Before inserting the microphone into the bot-

tom of the back-box, use pliers to remove the

part that is highlighted 3.

Insert the audio group high up, near to the top of the back-box

Fit the microcontact (bottom right) into the correct housing 5.

The front plate is equipped with a common call for the

microcontacts, to be used when other buttons are to be

installed (maximum of 4) 6.

Insert the lighting group in the relevant housing 7.

Remove the two protective seals on the holes in the recessed

box and attach the back-box using the two screws provided 8.

Make the connections and secure the cables using the cable

holder 9.

The cable holder must be located near to the audio group.

Recessed installation