Acoustic Research AWSBT8 Installatie- en bedieningshandleiding - Pagina 2
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Acoustic Research AWSBT8. Acoustic Research AWSBT8 6 pagina's. Portable wireless speaker
Pagina afdrukken
Introduction
The Acoustic Research AWSBT8 portable wireless speaker makes it easy to take your music
wherever you go and share it whenever you want, with Bluetooth® wireless connectivity and
a built-in auxiliary input.
This manual covers various connection options and detailed operating instructions for
making the Acoustic Research Portable Wireless Speaker a valued part of your lifestyle. If,
after having reviewed the instructions, you have any questions, please call
toll-free 1-800-732-6866 or visit www.acoustic-research.com.
Tour of the Speaker
Front panel
Power and Pairing indicator
status of the speaker.
Blue, slow blinking: The speaker is on but not
paired or connected (like when you turn the
speaker on for the first time).
Blue, fast blinking: The speaker is in Bluetooth
pairing mode. See the Bluetooth Setup section
for more information.
Solid blue: The speaker is paired with a
Bluetooth-enabled device and ready to play
audio.
Back panel
Bass Boost
button turns the speaker's bass
enhancement on and off
On-Off
button turns the speaker on and off.
Pair-Press and hold (3 sec)
speaker in pairing mode for Bluetooth setup
(press and hold for 3 seconds). See the
Bluetooth setup section for more information.
Volume +/–
buttons adjust the speaker's
volume level.
Bottom panel
Audio Input
connects directly to your
MP3 player, smartphone, or other portable
audio device, using the 3.5mm audio in cable
provided.
DC IN
receives the small round end of the
included 10V 1500mA AC power adapter;
remove the protective cover to insert the
adapter.
Battery Compartment Cover
remove to install 6 AA batteries.
Powering th
Powering the Speak
There are two options to power yo
or using 6 AA batteries (not includ
AC Power Adapter
shows the
AA Batteries
1. Remove the battery compartme
2. Insert six (6) AA batteries (not i
("+" and "-") as diagrammed ins
3. Replace the battery compartme
Note:
Place the rubber cap in the
DO NOT
battery).
when not in use for long periods. Alw
recycle or dispose of them in accorda
Setting Up
Pairing
The Bluetooth-enabled device that
puts the
fi rst be paired to the speaker. The
needs to be done only once.
To pair your Bluetooth-enabled de
1. Make sure your device's Bluetoo
menu on your device to check.
2. If the speaker isn't already on, p
to indicate the speaker is turned
fl ashing blue.
3. Press and hold for 3 seconds th
to indicate pairing mode is ente
blinking faster.
4. Open the Bluetooth settings me
devices available (you might ha
enter "0000".
5. A confi rmation screen will appe
successfully paired. The blue ind
The speaker is now ready for yo
6. Turn the volume on your device
device. Control the speaker volu
the back of the speaker.
Note:
If you notice the sound from the
•
mix batteries with differen
DO NOT
mix new and used