Acoustic Research AWSF7R Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Acoustic Research AWSF7R. Acoustic Research AWSF7R 18 pagina's. Rechargeable wireless speaker with led flickering flame light
Pagina afdrukken
Pair and connect to your phone
4
Enable Bluetooth on your smartphone or other device (if it isn't
already on).
Make sure the Power/Pair indicator on the speaker is blinking rapidly.
(If it isn't, give a quick double press to the
gives an audio signal.)
Note: If you've previously paired a different Bluetooth device with this speaker, the speaker will
automatically attempt to reconnect to that device when you switch the speaker on. If you want
to pair to a new device, double-press the
signal.
Choose AR Sierra from the pairing options on your smartphone. (If it's not in the list, choose
"Scan" from your phone's Bluetooth menu.)
The speaker gives an audio signal when it's finished pairing and connecting to your smartphone.
The Power/Pair indicator turns solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to device. See your
device's owners manual for more information and specific instructions.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• Make sure there's nothing plugged into the speaker's AUX IN jack when you're trying to use
Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters).
This range may vary, however, based on other factors, such as room layout, wall material,
obstacles, your device's Bluetooth performance, etc. If you're having problems connecting to
the speaker, move closer to it.
• If your device asks you for a password to connect, use "0000".
If you're having trouble reconnecting, try the following solutions:
• Find the device named "AR Sierra" in the Bluetooth menu on your phone, and remove (or
forget) this device. Then start the pairing process described in this section again to re-pair
and connect.
• With the speaker on, press and hold the Volume – and Volume + buttons for 6 seconds until
the speaker gives an audio signal and turns off. This resets the speaker. Then, remove "AR
Sierra" from your phone's Bluetooth devices and repeat the pairing process.
Start playing music on your device
5
Set your device's volume for music to 50%. Start playing music or other audio on your device.
Within seconds, the speaker starts streaming the audio wirelessly via Bluetooth.
To adjust the volume of your audio: Give a quick press to the speaker's Volume + or – button
(on the back panel) or use the volume controls on your phone.
TIP: If you're playing music via Bluetooth, a quick single-press on the speaker's
pause/play.
button. The speaker
button on the speaker—the speaker gives an audio
Power/Pair
button will
3