CAME BPT MTMA/08 Handleiding voor programmering - Pagina 2

Blader online of download pdf Handleiding voor programmering voor {categorie_naam} CAME BPT MTMA/08. CAME BPT MTMA/08 8 pagina's. Communication unit for xip systems

Pagina afdrukken

General precautions

IMPORTANT! Important safety instructions: READ CAREFULLY!

•

Installation, programming, commissioning and maintenance must only be carried out by expert qualiﬁ ed tech-

•

nicians in full compliance with the regulations in force.

Wear anti-static shoes and clothing if working on the electronic circuit board.

•

Keep this precaution information.

•

Disconnect the power supply during any cleaning or maintenance work.

•

The product must only be used for the purpose for which it was expressly designed. Any other use is to be

•

considered dangerous.

The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.

•

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

•

1 - This device may not cause harmful interference.

2 - This device must accept any interference received, including interference that may cause undesired oper-

ation.

OPERATIONS FOR REMOTE CONTROL OF CALL BUTTONS

Manual configuration of terminals

Short circuit the terminals (

The unit restarts. The procedure has been completed successfully.

Remove the short circuit and connect the additional N.O. buttons to the terminals

BUTTON NUMBERING

and

), press and hold the two call buttons on the unit, and power the device.

as call inputs 1 and 2

and